No Love for Tungsten
“Why is the Incandescent Light Bulb getting the BIG old boot in
the modern era?”
Well it's really, really bad at doing what it was told to do, make
light!
Imagine you hired a new employee to stock shelves at your local
store but they only did their assigned job less than 10% of the time and more
often than not it was more like less than 5%(I blame FaceBook). That's an incandescent light
bulb. They are anywhere between 2-10% efficient depending on the type/quality.
The remaining energy is released as heat, which is simply radiated off into the
surrounding area.
“Why are they so inefficient?”
Well the design has not changed in over 100 yrs, dating back to
Thomas Edison. An incandescent light bulb is simply a piece of coiled
metal, tungsten, which is placed into a glass tube under a vacuum (no oxygen
gas present). Electricity is passed through the tungsten filament. As the
electricity passes through the metal, this causes the filament to heat up and
eventually glows white hot, roughly 2500° C/4600°F! In comparison, iron melts
at around 1500° C/2700°F, now that’s warm to say the least. That’s why
tungsten is used, or at least was. It has the highest melting point and tensile
strength of all pure metals giving it longevity.
“So, why so bloody HOT?”
A tungsten filaments main job is to create resistance, to
make it difficult for the electrons in the electrical current to flow through
itself. As a result heat is generated as the electrons “flow” through the
material. Now it’s not actually a flow, more like the most amazing examples of dominoes, but tungsten doesn’t make it easy. So heat is generated as particles
try to move past one another. This is why it has to be in the glass bulb. 1) so
you don’t touch the pretty glowing 2500° C/4600°F metal thingy, and 2) at those
temperatures the tungsten will combust if any oxygen gas is present.
“So where does the light come from?”
As the heat builds and builds, the atoms inside the filament begin
to vibrate more and more and more in their seats. It’s like feeding a toddler
candy every 10 minutes on an 8 hour car trip if your goal was to get them to
vibrate so fast they might burst right out of their seat belts! That’s like our
goal in tungsten. It’s referred to as a Black Body Object. I know, sounds
awesome, doesn’t it? (What’s even cooler is that Black Body objects exhibit what
is known as the ultraviolet catastrophe, which could have destroyed the
universe until we realized it won’t). Basically when an object gets SOOO hot,
the particles are moving so fast back and forth, they will begin to emit
radiation as heat, and eventually
higher levels of radiation, light! And there lies the problem.
The amount of heat needed to get the particles to this sweet spot is
extremely high, 2500° C/4600°F. It would be like feeding that toddler sugar
again, as a means to get them to sing a song. After enough sugar they’ll be
singing American Idol audition ballets. Not the easiest way to get the job
done, but that’s essentially how we have been lighting our world for over 100
yrs. It’s like taking the long way to work, driving an extra 100 km when it’s
only 5 km from your home. Not the most efficient means of getting there.
“So why are LED’s so much more efficient?”
Well let’s just say we have learnt better
parenting techniques. More to come…
Subscribe to stay up to date!
Any questions don't hesitate to ask. Join us on Facebook @ facebook.com/groups/stridelighting/ to join in on more helpful information, support and discussion on home lighting.
Thanks for stopping by. Visit us at www.stridelighting.com.
Subscribe to stay up to date!
Any questions don't hesitate to ask. Join us on Facebook @ facebook.com/groups/stridelighting/ to join in on more helpful information, support and discussion on home lighting.
Thanks for stopping by. Visit us at www.stridelighting.com.
Comments
Post a Comment